Honda TRX 450R banner

what cam

790 Views 10 Replies 5 Participants Last post by  miller
need advice what cam 2 put in friends stock 05 450r
1 - 11 of 11 Posts
probably the hotcam stage two, one of the most versatile ever made , or the original 04/05 HRC if he wants a little more top end with less bottom and mid... all considered id still take the stage 2 over anything in a mild build, and some bigger builds..
X2
Hot cam Stage 2
X2
Hot cam Stage 2[/b]
thax for the quik replys
X2
Hot cam Stage 2[/b]
thax for the quik replys
[/b]
actually was thinking about that cam in my 07 what do u think
Id say even better with the shorter stroke, but I hear the HRC for the 06 and up acts a lot like the Stage 2, maybe someone else has more experience with it. In your sig it says HRC kit, so I assume you have one, so it maybe little difference for the coin
Id say even better with the shorter stroke, but I hear the HRC for the 06 and up acts a lot like the Stage 2, maybe someone else has more experience with it. In your sig it says HRC kit, so I assume you have one, so it maybe little difference for the coin[/b]
think this winter going to get head ported and go from there from what i have read
great mod
Id say even better with the shorter stroke, but I hear the HRC for the 06 and up acts a lot like the Stage 2, maybe someone else has more experience with it. In your sig it says HRC kit, so I assume you have one, so it maybe little difference for the coin[/b]
think this winter going to get head ported and go from there from what i have read
great mod
[/b]

if you are interested in an early HRC cam i have a really nice one id sell...

PM if interested


Eric
Id say even better with the shorter stroke, but I hear the HRC for the 06 and up acts a lot like the Stage 2, maybe someone else has more experience with it. In your sig it says HRC kit, so I assume you have one, so it maybe little difference for the coin[/b]
think this winter going to get head ported and go from there from what i have read
great mod
[/b]

if you are interested in an early HRC cam i have a really nice one id sell...

PM if interested


Eric
[/b]
What are the thoughts or differences from the 02 crf cam to the stage 2 hotcam?
honestly i have no experience with them but i heard there is one year crf cam that is close, that may be it... there is a cam guide in the engine section...
Honda 2002 CRF Cam - Part # 14110-MEB-670
A good all around cam, strong bottom and really strong mid range with a decent top end as well.

Intake Lift(inches): .380"
Exhaust Lift(inches): .356"
Intake Lobe Center (degrees): 106.5
Exhaust Lobe Center (degrees): 107
Intake Duration (degrees at .040"): 249
Exhaust Duration (degrees at .040"): 272
Intake Open / Close: 18 btc/51 abc
Exhaust Open / Close: 63 bbc/29 atc
Lobe Separation Angle: 106.75
Overlap: 47


HotCams Stage 2 - Part #1024-2
Excellent midrange and top end increase, good all-around cam.

Intake lift (inches): .402"
Exhaust lift (inches): .343"
Intake lobe center (degrees): 106.5
Exhaust lobe center (degrees): 103.5
Intake duration (degrees at 1mm): 248
Exhaust duration (degrees at 1mm): 268.5
Intake Open / Close: 11 btc/ 53abc
Exhaust Open / Close: 55 bbc/23 atc
Lobe Separation Angle: 105
Overlap: 38.25
See less See more
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top