[anden.820632]

so i need to know how to tune my quad like where the screw is it boggs and like pics would help

 

[Bullvine rider!!]

so i need to know how to tune my quad like where the screw is it boggs and like pics would help

What year is your quad? What mods do you have? Whats your elevation etc. these answers will help dial in your quad.

 

[Bullvine rider!!]

What year is your quad? What mods do you have? Whats your elevation etc. these answers will help dial in your quad.

How does it run?

 

[anden.820632]

it runs ok but it boggs pretty hard and it is a 2005

 

[anden.820632]

and 1,384 ft elvation

 

[Bullvine rider!!]

and 1,384 ft elvation

If it starts and idles fine but bogs when on the throttle the pilot screw wont fix that. First thing you should do is clean the carb out good and find out what your jet sizes are. If youve never taken off your carb to clean it. There’s plenty of step by step videos on YouTube. Let me see if i can find you a link.
but chances are you have a clogged main jet. And a good cleaning will fix that right up.

 

[CJM]

what is the current jetting and what if any mods are done to the bike?

if the bike has an exhaust and open airbox you should run about a 180-185 main jet, stock pilot and 2.5 turns out air/fuel screw

 

[anden.820632]

I put a new card on it and I just don’t know what screw it is to change it from Rich to lean

 

[CJM]

teh large flathead screw on the bottom, rich is out and lean is in

 

[Bullvine rider!!]

You cant get to the screw while the carb is on the quad. ( its very difficult) its at the very bottom of the carb , exhaust side, towards the motor. Get your self a flex jet screw, here’s a pic. You can install it while carb is on. It comes out the bottom of the carb and turns up to the left side of carb so you can access it much easier.
but for now loosen the clamps on your carb and twist it sideways so youcan reach the stock screw, turn it in clockwise (lean) and out counterclockwise (rich). Or take the carb off to access it.

 

[Bullvine rider!!]

Sorry you have a 2005 trx, if my memory is right you can reach the pilot screw easier on those. Like cjm said flat head screw at the bottom of carb towards the motor. Im not sure if the flex jet fits 04/05 model.

 

[Bullvine rider!!]

Sorry you have a 2005 trx, if my memory is right you can reach the pilot screw easier on those. Like cjm said flat head screw at the bottom of carb towards the motor. Im not sure if the flex jet fits 04/05 model.

You can buy the straight knob screw I believe for 04/05’s to access it easier, not the flex jet. Sorry for tbe confusion. Hope this helped.