Honda TRX 450R banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
So recently I broke the longer of the two bolts that hold the oil filter cap. I read on threads that by taking off the case I could easily remove the broken piece of the bolt stuck inside. And I did, was very simple... so I replaced the bolt with a new one, put the case back on, oiled everything back up and when it came time to start it up it wouldn’t.. unless I bump started it. once the quad is warmed up I could Shut it off and it’ll start right back up. But once it cooled off I’d have to bump start again. So my question is what could be the problem here and how should I go about it ? Any ideas would help thanks!!
 
1 - 3 of 3 Posts
Top