Honda TRX 450R banner

1 - 8 of 8 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter #1
I recently completely rebuilt my engine and found out it wont switch gears. I'm just wondering if I'm gonna have to tear it all out again and rip it apart or is there something I can do or try without ripping it out??? Any advice will be appreciated.
 

·
Making HP ain’t free. . .
Joined
·
4,308 Posts
If your fortunate it could just be something with the shift pawls behind the right cover, but likely It’s gonna have to come back out and be tore down.
 

·
Registered
Joined
·
34 Posts
Discussion Starter #6
So I found out that all I had to do was wiggle the drive sprocket and it switched gears but I found that I was getting coolant in my oil somehow. So I ordered some new gaskets to try and solve my problem.
 

·
Registered
Joined
·
34 Posts
Discussion Starter #8
Ya because I was trying to change gears while the quad wasn't moving, or with no chain on but once I rotated the sprocket it would switch gears.
 
1 - 8 of 8 Posts
Top