Honda TRX 450R banner

Jetting with a white brother carbon fiber slip on

470 Views 1 Reply 2 Participants Last post by  jothay05
what kind of jetting would i need for a white brothers carbon fiber exhaust and what is the factory jetting when they 450er's come from factory. just got an 07 and not sure if it jetted enough.
1 - 2 of 2 Posts
to start with, i would do a plug check. most general way to find out if its jetted right. after you get your bike warmed up, goose it good and while its revved up, shut the quad off. then pull the plug and see what she looks like.....

black= rich
tannish=where you want to be
whitish=lean

once u get in the good area you should be ok, but if you wanna get serious go to a dyno and get it tuned up. hope this helps!
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top