Honda TRX 450R banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Have an 05 that I recently just did the fcr swap on, fcr is off a 2012 trx. The mods on my bike are a 465 big bore kibble white valve stage 2 hot cam and will be running no air filter lid. Can anyone give me a decent starting point on jetting and also it has the stock needle in it I believe, do I need to change needles and if so what needle would work best for me. Thanks for any info
 

·
Registered
Joined
·
6 Posts
Discussion Starter #2
Have an 05 that I recently just did the fcr swap on, fcr is off a 2012 trx. The mods on my bike are a 465 big bore kibble white valve stage 2 hot cam and will be running no air filter lid. Can anyone give me a decent starting point on jetting and also it has the stock needle in it I believe, do I need to change needles and if so what needle would work best for me. Thanks for any info
Also has a full hmf exhaust
 
1 - 3 of 3 Posts
Top