Honda TRX 450R banner

Jets What Brand and more???

491 Views 2 Replies 3 Participants Last post by  05blacknblue450
i have a DASA on right now and looking into putting jets and filter on to get rid of some popping from the pipe... people say that dyno jet isnt good or is it? so what brand of jets should i be looking for? and how much does the A/F screw being changed (opened) affect my mileage just want to know before i am in the middle of no where and be used to the stock and run out of gas... just a thought
1 - 3 of 3 Posts
i have a DASA on right now and looking into putting jets and filter on to get rid of some popping from the pipe... people say that dyno jet isnt good or is it? so what brand of jets should i be looking for? and how much does the A/F screw being changed (opened) affect my mileage just want to know before i am in the middle of no where and be used to the stock and run out of gas... just a thought[/b]
use Keihen jets and try to back the fuel screw out 2.5 turns. That should rid of your popping.
I agree with the above post. but i say buy the HRC needle with it too. And jetting dont change your fuel mileage all that much that your gonna get half of what you used to, if all you have is a pipe then i doubt you will ever notice a change at all in mileage. But if you have a DASA i would definitely be gettin that thing jetted before you ride again. These things are lean enough from the factory with the corked up exhaust. Aftermarket filter, Take the air box lid off, throw in about a 180 main, HRC needle on about the 3rd clip down and i think you will be very pleased with power.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top