Honda TRX 450R banner

Jet change

574 Views 2 Replies 3 Participants Last post by  new2honda
Is changing the jets on an FCR for an '07 anything close to changing them on the '04-'05 style carbs? I went through the tutorial in the FAQ and thought it looked easy but i didn't know if it was anything like the fcr. I should get the jets tomorrow so i've yet to tear into the carb, i've just taken the tank off so i can get to it. Will i have to take the carb off, or can i just rotate it on the clamps?
1 - 3 of 3 Posts
Is changing the jets on an FCR for an '07 anything close to changing them on the '04-'05 style carbs? I went through the tutorial in the FAQ and thought it looked easy but i didn't know if it was anything like the fcr. I should get the jets tomorrow so i've yet to tear into the carb, i've just taken the tank off so i can get to it. Will i have to take the carb off, or can i just rotate it on the clamps?[/b]

its basically the same, and you can turn it. just be careful with the wires. i would recommend changing the fuel screw so you can adjust it easier though.
should be pretty close to the same. they are completely different carbs, but almost all carbs have the main jet inside the bowl on the bottom. good luck
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top