IMS/Roll Design Heel Guards
Join the discussion
Recommended Reading
-
Shock purchase
Suspension, Chassis, and DrivetrainRebuilding the rear end right now and I am getting close to buying a new rear shock. Pretty much have my mind set on the Fox Podium for the rear. My question is where is a good place to buy the shock from? It is being paired with a 22" Walsh Desert/Baja swing arm with their EZ25:17 link. Looking...- 5
- 216
-
AZrrider · updated
-
differences in frames...2005-2009 trx450r
Suspension, Chassis, and DrivetrainWhat are the differences in the 2005 trx450r frame and a 2009 trx450r frame. Just want to know the differences in the frame itself. Any help would be great- 10
- 2K
-
Transmission problems
Suspension, Chassis, and DrivetrainHello folks, I need some help, I'm in the process of rebuilding the engine on my 07 ER. I have been struggling with this transmission for a day or so. When the main and countershafts are in they will spin wither way for a bit, but lock up. I have put the case back together and tested it. It has...- 15
- 309
-
jfaubus · updated
-
04/05 vs 06 & up gt thunder linkages
Suspension, Chassis, and DrivetrainDoes anyone know what the physical difference in the different linkages? I bought a 06 swinger several years ago and cant remember if I replaced the linkage. I am gonna buy a new swinger and was gonna change the linkage if needed. I have a strong suspicion i have been riding on a 05 linkage with...- 12
- 187
-
Open Heims gap
Suspension, Chassis, and DrivetrainI bought a set of walsh arms and they have open heims all around. I have never installed any open heim and am curious if its ok to have a big gap between the heim and the spindle? I know with a ball joint the boot usually touches but there is a 1/2 inch under it. Is this normal?- 0
- 73
Join now to ask and comment!