HRC JETTING
Join the discussion
Recommended Reading
-
06 trx450er, hmf full exhaust, uni filter, lid removed, re jetted..only wants to run with choke on??
EngineI jetted to HMF recommendation on jetting 165 main, 48 pilot. Got the tusk adjustable fuel mixture screw. HMF competition full exhaust, uni filter with lid removed and green wire mod done. Riding at about 500 ft above sea level. It’ll fire right up with choke on then idle high. After I turn...- 5
- 143
-
uraceulose · updated
-
Dumb question about oil change
EngineHey its me again, so I've done the oil change and the manual says .82 quarts and thats exactly what I put in. I started the bike once everything was dine and it ran like normal. But when I checked the glass it was almost empty. I thought it just needed to be left alone and I did but the oil...- 2
- 85
-
TRXDiego · updated
-
Broken shift shaft/forks?
EngineYesterday I was trying to adjust my foot shifter so it would sit lower and not so high. So I figured all I had to do was remove the shift lever and reposition it on the splines to my desired angle. I took off the nut that clamps the lever to the rod and it wouldn’t move at all. After trying to...- 1
- 95
-
Bobbyscott11 · updated
-
Too big main jet?
EngineHey guys new on here but not new to 450rs. Anysways I bought a fixer upper 2004 450r and the first time riding it, it was getting extremely hot so I decided to pull the carb apart and check out the jets anyways it had a 118 main (stock) in it. Air box lid was on but has a full white brothers...- 1
- 137
-
Blaze76 · updated
-
jetting slightly above stock.
Enginethere are tons of posts here on how to jet your carb based off certain mods, ive also seen many people say how lean they come from the factory. i have bone stock 06 450er. right now the jetting is stock as well.would i benefit at all from going up to slighly higher jetting? what if removed...- 18
- 711
Join now to ask and comment!