Honda TRX 450R banner
1 - 4 of 4 Posts

·
Registered
2014 trx450er
Joined
·
14 Posts
Hi I have a 2008 Honda trx450er and I can’t get the cam chain on it seems way to tight tensioner is out and still can’t get it..
I had this problem putting a new chain on my rebuild, make sure it isn't stuck on the bottom end then loosen the cam bolts and tilt the cam a little toward the chain side. Have the cam gear in the chain and try and wiggle it on. It should go on, just take your time with it.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
I had this problem putting a new chain on my rebuild, make sure it isn't stuck on the bottom end then loosen the cam bolts and tilt the cam a little toward the chain side. Have the cam gear in the chain and try and wiggle it on. It should go on, just take your time with it.
It goes on just seems way to tight
 
1 - 4 of 4 Posts
Top