you clean it just like a kandn. as far as installing it, you just remove your old filter put the billet ring inside the tube, then put on the air filter with the outerware and your done. with the breather hose just slide it out enough to fit the filter, you can also buy a breather filter for it and run that hose outside of the box.
Dasa intake questions
Hello, I just received my Dasa intake and filter and I had a couple of questions. I was disappointed to see no instructions in the box, but oh well. I got the filter, the aluminum ring, the clamp and the Outerwear. Do I need to modify the breather hose inside the airbox? The filter seems like it is not going to fit inside the airbox with the breather hose (side hose) attached.
Also, am I missing anything? When I bought the Pro Design intake (when I had my Raptor) it came with a nicely crafted aluminum intake (this one seems cheap). Also, how do you clean (and oil) these blue R&D filters? Is there a cleaning kit for them like K&N has for theirs? Thanks a lot.
Also, am I missing anything? When I bought the Pro Design intake (when I had my Raptor) it came with a nicely crafted aluminum intake (this one seems cheap). Also, how do you clean (and oil) these blue R&D filters? Is there a cleaning kit for them like K&N has for theirs? Thanks a lot.
1 - 6 of 6 Posts
Thank you. And when you say clean just like a K&N, does that include using K&N cleaning/oil products? Or does R&D make their own? Thanks.you clean it just like a kandn. as far as installing it, you just remove your old filter put the billet ring inside the tube, then put on the air filter with the outerware and your done. with the breather hose just slide it out enough to fit the filter, you can also buy a breather filter for it and run that hose outside of the box.[/b]
just get the regular kandn stuff... esentially they are the same type of filter. you will have to rejet your bike however. but you probably new that already.Thank you. And when you say clean just like a K&N, does that include using K&N cleaning/oil products? Or does R&D make their own? Thanks.you clean it just like a kandn. as far as installing it, you just remove your old filter put the billet ring inside the tube, then put on the air filter with the outerware and your done. with the breather hose just slide it out enough to fit the filter, you can also buy a breather filter for it and run that hose outside of the box.[/b]
[/b]
Thank you for your help.just get the regular kandn stuff... esentially they are the same type of filter. you will have to rejet your bike however. but you probably new that already.Thank you. And when you say clean just like a K&N, does that include using K&N cleaning/oil products? Or does R&D make their own? Thanks.you clean it just like a kandn. as far as installing it, you just remove your old filter put the billet ring inside the tube, then put on the air filter with the outerware and your done. with the breather hose just slide it out enough to fit the filter, you can also buy a breather filter for it and run that hose outside of the box.[/b]
[/b]
[/b]
looks like badinblack got you squared away. i'll just top it off with by saying i have the same year and the same intake. i love it.
1 - 6 of 6 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda TRX 450R
A forum community dedicated to Honda TRX 450r owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, classifieds, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
Bullvine rider!!
163 Replies
Walt427450R
21 Replies
SKPrairie450
20 Replies
