chrome swing arm
1 - 9 of 9 Posts
Joined
·
1,071 Posts
sawweeet!!!!!!
that thing looks awesome
that thing looks awesome
Joined
·
5,964 Posts
grrr..i need a damn 450R!!!
Joined
·
1,071 Posts
mine is gonna look like a mirror when i am done with it. polishing aluminum is a bizniggle.
Joined
·
3,685 Posts
what kind of wheel are you using? and are you using a rubbing compound....im interested in polishing mine.
Joined
·
1,071 Posts
first you have to get the casting marks off which is a b*tch, then you need to start sanding it, i started at 100 grit and i am slowly moving to 1000 grit. then all i have right now is a 6 in buffing wheel. i am using tripoli and white rouge.
Joined
·
3,685 Posts
are you sanding it with the wheel or by hand...and then buffing it with the wheel.
Joined
·
1,071 Posts
i got a busy bee for the open parts and a dremel for the small stuff, and then i will be using my hand for the inside.
1 - 9 of 9 Posts
Join the discussion
Recommended Reading
-
Shock purchase
Suspension, Chassis, and DrivetrainRebuilding the rear end right now and I am getting close to buying a new rear shock. Pretty much have my mind set on the Fox Podium for the rear. My question is where is a good place to buy the shock from? It is being paired with a 22" Walsh Desert/Baja swing arm with their EZ25:17 link. Looking...- 5
- 206
-
AZrrider · updated
-
differences in frames...2005-2009 trx450r
Suspension, Chassis, and DrivetrainWhat are the differences in the 2005 trx450r frame and a 2009 trx450r frame. Just want to know the differences in the frame itself. Any help would be great- 10
- 2K
-
Transmission problems
Suspension, Chassis, and DrivetrainHello folks, I need some help, I'm in the process of rebuilding the engine on my 07 ER. I have been struggling with this transmission for a day or so. When the main and countershafts are in they will spin wither way for a bit, but lock up. I have put the case back together and tested it. It has...- 15
- 308
-
jfaubus · updated
-
04/05 vs 06 & up gt thunder linkages
Suspension, Chassis, and DrivetrainDoes anyone know what the physical difference in the different linkages? I bought a 06 swinger several years ago and cant remember if I replaced the linkage. I am gonna buy a new swinger and was gonna change the linkage if needed. I have a strong suspicion i have been riding on a 05 linkage with...- 12
- 185
-
Open Heims gap
Suspension, Chassis, and DrivetrainI bought a set of walsh arms and they have open heims all around. I have never installed any open heim and am curious if its ok to have a big gap between the heim and the spindle? I know with a ball joint the boot usually touches but there is a 1/2 inch under it. Is this normal?- 0
- 73
Join now to ask and comment!