Honda TRX 450R banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I just put a stage 2 hotcam in my all stock besides full exhaust and jet kit.

I noticed a little bit of a tick when it’s idleing now. I broke the cam in correctly and torqued everything to spec.

The intake and exhaust valves were not out at all. .oo6 on intake and .0011 on exhaust.

It runs and starts great just notice a little bit of a tick at idle.

I did a google search and came across a thread to put the exhaust down to .009. Thanks
 

·
Registered
Joined
·
26 Posts
Ive always used .006 In. and .009 Ex. My bike is an 05 also but with the stage 3 cam and it also has a slight tick. Been running this setup for over two years with no problems.
 

·
Registered
Joined
·
6,140 Posts
Every hot cams I have used ticks, raptor, z400, trx, that all tick not as bad as a web or woods, but they make some noise. I also set mine a little on the tight side
 
1 - 3 of 3 Posts
Top