i have ordered a hotcam 2 and just wondering what kinda whp numbers it will add. i have a full duncan fatboy no lid k&n filter and hrc jet kit,

bump.

i dont know the numbers bit when i put mine in it made a bigg difference hope that helps

I got a hotcam 2 with a wtb slip on k&n no lid on an 08 making 45.5hp and 32.1 tq stock I was making 37hp

Each quad is different and you wont know until you dyno it. People will be able to give you a ball park but this forum is for dyno testing and results so you might want to put this in the regular engine thread until you dyno it.

i just put in a HC2 as well. wondering where I'm at. Mine is an 05' though. I dyno'd 36.4hp with just silencer core removed in stock form a while back. since then added a ron woods rotax intake, yoshi trc pipe, and hc2. I'm hoping to be close to 42-44

Piped, Cam'd, Lid off 450Rs jetted right are all gonna be around the mid 40s. 45 or so..with low 30s for torque. But all dynos will read slightly different, but they will all make around that power. With a hrc kit and local ported head i made 50hp with a 39mm yfz carb. Thats hrc header, no baffle, lid off, no toil filter, hrc cam.