i wanted to find out how my times looked compared to others...this is not intended to start drama...i just want to know how my bike does...a brief list of whats done...bike weighs 248 ready to run,rider(brandon lee)weighs in at 148...

true stock bore and stroke
drg head
drg carb
webb cam
dasa pipe with my own design outlet
stock lightened frame
plus 6 swingarm
no overide
on q16 vp fuel


4.728 @ 64.40
1.688 60'


4.730 @ 65.03
1.732 60'


thanks again

chris

...bump...

that is a good time... Are you racing on dirt or sand? I know BBR ran pretty constant 4.8 on his stock bore and stroke 04 450r... he ported the head himself and I beleive it had a stage 2 hot cam... with an OOF drag pipe and I have no idea what size carb..... this was on sand.

we ran at newtown dragway in virginia...its a mix between sand and dirt...theres still more in it!

Thats great Chris and everyone says newtown puts down slow times. You need to take your build to Planet Sane race next year and show them the little Stock bore / Stock stroke that could!

Chris when is your next Newtown Race? I would like to see your bike run.

I weigh 165, bike is only about 20lbs less than stock. My girlfriend timed me all over between mid 4-5 flat. Dirt and pavement were the same. Dirt was harder to keep in control consistently....

Hahahahahahahahaha

I hope your kidding

mine ran a 5.494 with me on it at 300lbs and 60 ft 1.92at 55mph in dirt loam, couple other 450rs runnin 5.0 to 5.4 all day.

ran at dragstip, 4.90 at 330 ft. spining 20 ft. out, me 240 pounds

i'm 285lbs. 2005 450r, stage 2 hot cams, full yosh trc, esr intake, 11:5:1 piston,hot rods crank. the best i could get was a 5.85. with a 160lbs. jockey he ran a 5.57 letting out of it on the start cuz the front end came up.

looks like the new setup helped ya out chris! congrats! we have left the honda world for now to play with the big block ds'. Travis fultons stock bore ds is running between 4.60 - 4.65 @ BRSD which is consistant with planet sand. you should be able to get your 60ft times down and get a little deeper yet!

thanks bbr...that is movin for a heavy old ds!nice job!

Carrol Racing went 4.71 Yesterday all motor at Newtown Dragway Great Job Chris.

i been best 5.05 at 60mph with 1.80 60ft on crappy rear tires...mods listed below and im on all true stock bore/stroke/head/and carb cant imagine and wait to see what i put down with any of them mods...

im running about 5.2, 5.3s. with a drg head, hc stgII, STOCK PISTION, stock crank, 40mm fcr. i dont think its too shabby, i got it to launch harder than any other quad there,

4.46 et
63.63 mph
1.428 60ft

4.48 et
62.49 mph
1.426 60ft

thunderroad sand drags mooreland ok

06 450r
stock motor with following
cam
pipe
no head work
stock carb with hrc jet kit
k&n filter
no air box
stock ign w/green mod
+6 arm
no wheelie bar
14 paddle extremes
boondocker 20 shot
stock frame lightened 310 lbs
me @ 185 lbs

look for pics on atvdragracers.com , from this past weekend once ziggy gets them posted,black and red drag 450r

Congrats on your times they sound great I would like to see it with some port work Jim

My hill set up consists of:
OEM frame honda with no wheelie bar and 12 paddle gliders with shocks, about a 240 pound bike with a 215 pound rider
It runs 4.7's with a 1.7 60' at just over 60 mph at the Delta UT sand / dirt track. Its at 5000 feet elevation.
My KTM set up very similar will run 4.8's at 60 as well.
Best for a 450 based bike out here is our 4.7's.

thanks,would like some RE love in the motor but it is running hard right now and hate to change this motor,need another motor to get built,head work would definatly help, still need to lose some weight on the bike

5.1 1.77 60ft 59.8 mph stock motor ds650 naturally aspirated, 360lbs with wheelie bar.

before that i only had it at the track one time. that day it did 5.20 with nitrous gearing and tire on motor and ran 4.8s on a 15 boondocker shot. never had it back at the track on the spray.

spring time will hold different........760cc pami with all the goodies.