QUOTE(Gumby46 @ May 5 2009, 12:23 PM)

QUOTE(smokin_6.0 @ May 5 2009, 10:10 AM)

when motor is running it will pump enough oil to drop below sight glass. let it sit for 2-3 minutes and it will come back
x2
The only time you get a truly accurate oil level reading is when on flat ground you run it for a minute then let it sit for a couple minutes, then check the sight glass.
its been sitting for about a month on level ground. i pulled the oil plug last nite just to see if it had oil in the motor and it had plenty oil but nuthin was showing in the window....i kno nuthin should be showing now that i drained all the oil.