here is a chart to figure out what shims you need, for people who are not good with numbers.. this is for the yfz, but it should work fine .

That could be extremely handy. See if you can make it bigger and I'll pin this topic in the EngineTech FAQs.


If you can't make it bigger let me know and I'll see if I can help.

ive been trying to re-size. but i cant get it to host at photo bucket, and it wont just post it that big here, so if you can do it feel welcome to do it

Thats a big help....Thanks

you should mic every thing as any way as they are never the same and what if the # are wore off like they always are