well its a 06 stock bore 14.25:1 Venom piston, Venom Port and polish, +3 stroker crank, HotCams STG 3, Full Yosh, and Pro Design Intake ? any rough numbers out there would be appreciated. Havent had a chance to Dyno it yet

55/36

Thanks !

Sorry, but i do not think that build would hit 55 Hp,

I would guess somewhere along the lines of

52-53/36

-Kip

ya im thinking same as pgreenlaw

why not it's a stoker has port/polish good piston on race fuel and a good cam that sounds like like 55 to me

75hp.

1) he has a Yoshi Pipe

2) The intake is not amazing

3) That porting is not big HP porting, more TQ band Porting

52/36-38 would be my high guess.

-Kip

When I had stock bore, carb, intake, and piston mine hit 55/35.

50 on this dyno and 60 on that one....

^^^^^^

East Coast Dynos, West Coast Dynos; respectively.


:D

hahahaha i think some times you read to much into things.. i have stock carb and intake to and i made 50 hp.. this dude has a stoker and high compression piston.. im sure thats 5 hp and this is before my big bore kit.. this is with just hot cam, venom head, and hrc/hmf exhuast.. 50 hp 33 tq on rages dyno

Im gonna say it plain and simple, i dont think this bike will make high HP with the head thats on it.

Its not about what parts you have on it, its about the quality of the parts and making them work together.

My stockbore makes 57.5/ 34.5 but its a Racers Edge AZ build,

Venom Builds usually do not put up the HP numbers of other builds.

Seem to be decent on the TQ Side

Not bashing, just IMO

-Kip

I'd say low to mid 50's for HP...depends on if you got lucky with the head work or not and mid 30's tq.

But...you won't know until you get it on the rollers and also get what a stock bike makes on the same dyno for reference.

hahahaha awesome. I'd run it in the midwest.