Click to view attachmentClick to view attachment

Hows it run? Any tranny problems yet?

my friends got one of them kawies

nice lookin kawi, i have a kawi as well i realy like it and i am in the process of building the motor

what dont you have??

I like the yamaha, but both are clean in white......

looks good alot of the guys i race with run kawis, they seem to be very durable except for the electrical problems, you had any electrical issues?

It runs ok... I haven't had any issues with it yet. Tranny or electrical.

I am in the process of building the motor a little bit too.
Click to view attachment

they both look clean... i like the kawi... i have only seen one of them around here where i live, and the guy that had it COULDNT RIDE IT FOR CHIT !!! how are they? you like it?

I like it,but is hard to get "go fast" parts for. Almost imposible to get light wieght drag parts!!! Such as drag Aarms. Having a +6 swingarm built for it right now.

My buddy went out and got the kawi as soon as they came out. He tested crower's cams for it.

Nice clean quad. I am a fan of the green though

im partial to either the MONSTER ENERGY black or the red and black ....

if i was going to get one !!!

Click to view attachmentClick to view attachmentGot my new +6 swingarm.....Just took it to get powdercoated today.

oooo leave that swinger raw.....looks cool

I thought about it.

ya that swinger looks sick...

get it PC'd clear to keep it from rusting but i would leave it like that

yea i think it would look sick raw, my buddy did that to his BMX bike and it looks awesome

who made it, it looks real nice

SLC Quadcostoms made it.

I ended up going with silver metalic on the swingarm.Still waiting on getting my head and cylinder back. Ordered my gaskets today. I will get some pics when I start getting it back together.

Nice looking kawi, I bet it smokes that yfz next to it!!!!

The only time it is in front of that one is when they are in the back of my truck

Click to view attachmentClick to view attachmentReady to start putting it back together.

Click to view attachmentA few more.

Click to view attachment
Click to view attachment

Nice looking parts. What kind of cylinder/piston is that? Did you have the head worked on? If so who did the work, and what was done?
We are going to have to meet up sometime so I can see how that thing runs.

Thanks.
Stock cly. bored and sleeved to 100mm (northwest sleeve) Head ported by Kenz cycletech. JE piston Webb cams(242/216 grind). Should have motor back together this weekend.My drag axle will be here Monday. Dyno Tune on Wensday?
Will be at silverlake 4-4-09 if you want to race

Wow, I can't wait to see how it does!

Thats a lot of work, but should be a runner for sure. Has anyone done a 100mm bore, on a kfx yet. Just curious, I haven't really read about one yet. Do you know of any issues with doing that yet?

Hahaha, race huh, well I will just give ya this one lol, my kfx is still pretty much stock other than an exhaust. I just want to see how fast it is. I haven't had any money to really put into it. I just got done building my yfz to a 480 with a 42mm carb, and shouldn't have spent the money on that.
I don't think I can make it that weekend. It is only 2 weeks away and I still have to get it tuned in. Plus I would like to try and find some paddle tires also.
Where are you having your quad dyno'd at??

Ryan

There is one other guy that I know of that did a 100mm,but he doesn't get on the forums enough for me to find out about it. I hope I don't have any issues!
I am getting it dynoed at CSA in Almont.It,s closet one I could find with an AF meter.
I have a set of paddles F/S on here that would work really good for you

[/quote]
There is one other guy that I know of that did a 100mm,but he doesn't get on the forums enough for me to find out about it. I hope I don't have any issues!
I am getting it dynoed at CSA in Almont.It,s closet one I could find with an AF meter.
I have a set of paddles F/S on here that would work really good for you
[/quote]

Yea hopefully you don't have any issues. I seen your paddles for sale yesterday but they seem a little much for me at 10 paddles, also I don't have that kind of money. I have a extra set of stock rims that are like new, I'm going to just try and get some tires for, but I will have to find a 9 in. tire.

Have you ever used CSA before? Do you know how much they charge to do a kfx with the efi? I don't have a PC3, I bought a dynatek so it is a little different, no maps or computer, more like jetting, just adjust screws for low, mid, high.

Ya I used them last year. I think they are $225 for a complete tune.
You are going to have a hard time finding 9" tires, I don't know of anyone making them.
My 10 paddles are every other paddle is a glider.
A set of 6 paddle brats would work good for you to,I had a set when I was stock. But they are usally about $300 too.

I got the motor together and the intake on tonight. Hope to have it running by Monday

Looking forward to hearing how she runs. What does the displacemrnt work out to with the 100mm cylinder?

It will only be a 488.

There is a lot of strong motors around 480 - 490cc, so I wouldn't worry about it "only being a 488" lol. . . .

Ya I hope mine ens up being one of the "strong" ones

Did ya getter running today?

Yes I did..... Didn't ride it yet......... Had a small issue with the spacers for my drag axle.....Got thet fixed last night,so I should get it done today and break in the motor

Click to view attachment
Click to view attachmentGot it together and to the dyno ..........
#1 is were it was at before the tune and after
#2 is last year and now

Looks like some good numbers! How does the power feel? Is she pretty responsive with the EFI?

Glad to see you got it up and running!

Very responsive
So far the power feels good......I haven't really had a chance to ride it yet. Going to Silverlake Saturday so I will know more then

Well I went to silverlake Saturday......Ran good I was happy with it,won a few lost a few......Thats racing.lol
Had real good time,seen a few people from here. Good seing everyone again!!

I'll tell ya what it will be a long time before another KFX will run you down. Very nice and good running quad

Thanks,but it's not the KFX's i'm worried about.......It's the TRX's and YFZ's. lol

well those are good numbers.. im glad u finally got it done, congrats on winning some races.... its still early get it done up a lil more and ull be winning alot more lol

lets see some pics of it in action !

I finally took my camera to the dunes.....Here are a couple of pic's of it done(for now)
Click to view attachment
Click to view attachment

Click to view attachment