I think I may have got one fron the first batch because I had to beat thr S@#T out of them with a rubber mallet to get them on. I then had to finish drilling out some of the holes to get the bolts to go through. So the install was a huge pain in the ass. But after I got them on they are very sturdy. I just hope I never have to take them off because I may as well have tig welded them on because they aint movin!!!

I'm thinking about getting the pro pegs soon, you're the 1st person i've heard that has had fitment problems so far.

What price did you get them for?

man i bought a set of those nerfs and had the same exact problem

I have the pro armor nerf bars with the heel gard and I had no problem putting them on.
They seem real sturdy too.

My boy and I both have the Pro Armors on our 450R's. We love them and had absolutly NO problems getting them on!

Mine were a pain in the a$$ it took me like four hours of hell to get them to fit.It was worth the headache cuz they are sturdy.I'll never get them off without cutting them off that's for sure.

just installed my pro armor nerfs with heel guards, paid $200.00 and had no problem installing

I just added a set of the race peg's and they went right together. The foot peg mounts were a little tricky but other than that it went smooth.

I have installed 4 sets, and no problems with them mounting up.

Installed my fat pegs today and they fit perfect. definetly worth the money.

I had a hell of a time putting mine on too.

Later realized that I installed the foot peg mounts on the wrong sides. Changed them around and everything went together perfectly. The directions didn't really state which one was left and right, so I figured the curved end followed the curvature of the frame and put it pointed down. WRONG!!! This will also make them sit a little lower. Learn from your mistakes I guess!

I love the Pro Armor Fat series. They are strong as hell and a breeze to install, if done correctly!

It took me about an hour to put mine on, with a few bumps along the way. But once they're on they're on...and way sturdy. I've whacked a few rocks with mine and they've held up awesome, and I love they way they look.

I have the once that reuse the stock pegs.

lets see some pictures. i have the AC Pro-pegs and just broke the mount, i like them but they will not stay tight. vibrate like hell and always have to tighten them every ride. show us some pictures of these bad boys.

I agree Id like to see pics of the pro armors installed

I had the same problem. When i loosened all the bolts tell i got em in and then tightened them i had no problem

I would like a set of those in black

yeah i just bout a set of the pro peg nerfs, yet to install them, but ive got to give props to pro armour, they forgot to send me the pegs, so i called them up expecting to have to figght them to get the pegs, but with no questions asked they sent them out and i recived them a week later, with a spare set of inserts. must say some of the best coustmer service ive ever recived

installed a set of pro armor's last weekend and what a pile of crap to install. left side lined up perfectly, right side tho was a b!*#$. took me and my buddy about two hours of tweaking to get everything lined up perfect without stripping the frame bolt holes. if anyone still wants pictures lemme know

I would, I just bought a used set and if you have pics of the hardware that came with the nerfs to mount them Id like to see that too. I think I may be missing something, but IDK.

i got the set with the heel guards, not sure if that makes a difference. ill try to get a few pics up tonight after work hopefully. i know off the top of my head that mine came with 2 longer bolts to go thru the bottom of the a-arms, 2 smaller bolts to go thru the footpegs, and 4 tabs to hold the netting to the frame (2 each side) and i think that was all that came with it.

Make sure you put the part of the nerfs that connect to the pegs on first.You can use your stock a-arm bolts instead of the longer ones that pro armor gives you.

ya I have the same ones, did you get bolts for the rear mounts? Or for the pegs, or where the pegs mount to the frame? Can you sanp a pic of the front too, mostly where the two pieces come together and the mounting bracket in the front?

I didnt get any bolts at all, mabey if you can, help out with that? PLEASE? LOL

i get of work at 11 pst so soon as i get home ill take some quick shots of the areas. you use the bolts that hold the pegs on to hold the nerfs on there as well, but the a-arm bolts are definatly longer. i'm sure i still have the instruction's in my tool box so ill see if i can find some bolt sizes and try to take a good picture

Thanks man, Im about 70 miles from you if your in vegas. We should meet up and ride sometime. Theres some real good riding in Laughlin, if you like the desert.

So there should be bolts that came with the nerfs, or use the stockers, except where the pegs mount? Right? They mount to the a-arms? Im confused with this and Ive had many sets of nerfs.

yea i heard about laughlin, still trying to save a few pennies for a trailer so i dont have to always rely on my roomates in laws trailer. i usually ride up in apex near nellis afb and the vegas speedway if your at all familiar with that.

im 100% positive you need longer bolts where they bolt up to the a-arms. yea you use the same apex bolts that are in holding the pegs on right now. should be home in an hour and a half, depending on traffic from base and ill take some pics and post em up

heres a few pics, hopefully they help you out. wasnt able to get a good pic of the instructions, but the bolts that attach to the a-arms are hex head M10 x 70MM bolts and also has a washer on each. the bolts that connect the bottom of the foot peg to nerf bar support (where the plastic heel guard connected to the foot peg) are he head M6 x 16MM bolts. if you need some better/clearer pics i can bust out the dslr tomorrow.

awsome man, Im gonna have to head to the hardware store to get some nuts and bolts.

Im kinda familar with the area your talking about, Ive raced the World of Minis about 10 times out there. Its a bike race, but its right across the street from Nellis in the same are as the speedway, but never at apex.

I appericate the pics man, thanks.

no problem, lemme know how it turns out. did the person that sold it to you send you the clips that attachthe netting to the frame?

ya got the clips

I put a set of fatpegs on my 450 & a set of sport series on my girl's 400 in less than 3 hours. Couldn't be happier w/ the install...fit & finish is top notch.

I've got them also, hardest mounting point for me is where it hooks up with the rear fender bracket, the stock holes were trashed in the process of attempting to put them on, I've been deployed the last 4 months and get home in August so the install will continue then. They look great though, and I can't wait to try them out.

old thread

but mine were a bastard too.

put the footpeg mounts on upside down first time... it was complete hell getting them back off.

flipped them the right way, it was a little easier but not by much

Fully installed and love them, took her out to the hills Friday and Saturday.

Working on installing some more of my new toys, might throw some pics up when I'm done.

i'm about to order the sports seriees full system without the intergrated heel guards. Any one had any experiences with these. I am about to drop 435 so lemme know if there worth it...

thanks
colin

i got the pro armor black nerfs and they r a pain to install but look really good once they are on.