Schmitthead
Apr 12 2007, 11:34 PM
Well here it is folks, enjoy.....
---------------------------------------------------------------------------------------------------------------------------------------
QUOTE
I wonder if anybody out there is willing to give up their 450R. You can rest assured that it will have a good home, with a big family to love it. I promise it will be ridin atleast once a week, maybe twice depending on my schedule. It will recieve only the finest of fuels, oils, and lubes.... I can be reached by PM only, thanks for your time....
This all started as a joke, I was just trying to get back in with all y'all by cuttin up a little bit. I never thought it would turn into what this has become. Alot of you, the members thought it would be cool to donate your spare parts so we could try and piece a whole 450r together. Obviously I got on board with it and even threw out some ideas about maybe it being a site project or something. Everybody could personalize their parts, so in the end it could be a crazy looking project that everybody had their hands in. Really thats the only way I would be able to except any of your parts. I just wouldnt feel right unless you guys left your mark. I am going to be taking pics of the build and giving credit where credit is due, meaning I'll pose(yes pose) with your part letting everybody know who this part came from. With that said, I am going to put a list of parts up so we can mark off what parts have been recieved and parts needed.
My address is-
Tom Schmitt
3138 Ravenwood Blvd.
Toledo, OH 43614
I am on a budget right now, so I wont be able to pay for everything to be shipped at once. Zach648 owns a Greyhound station (they ship parts and people) and he is sending me some coup's for 25% off shipped items. I will send them to you with the money to ship the item/s.
04-05 450R Parts ListFRAME
A-ARMS
TIE-RODS
BRAKES
SPINDLES
WHEELS
TIRES
HUBS
ENGINE AND COMPONENTS
WIRING HARNESS
PLASTICS
SEAT
GAS TANK
OIL TANK
STEERING STEM
BARS
THROTTLE AND COMPONENTS
SWINGARM
AXLE
SHOCKS
RADIATOR
FOOT PEGS
EXHAUST
SUB FRAME
Can you guys think of anything else?????
Schmitthead
Apr 14 2007, 01:42 PM
Let me know if you can think of any other parts, thanks a million....
Nor*Cal
Apr 14 2007, 01:59 PM
There's a few that come to mind like sprockets, chain, bumper, grab bar, clutch perch/levers and other small parts that will pop up as you build the list.
As I stated in the other thread, I have parts like the full exhaust, tie rods, chain, front tires and more. However, one of the last membors that replied to that post had a TON of stuff that he offered. It would make shipping cheaper for you if you got a bunch of parts at once. I suggest you contact him to see what he will send. That would knock the list way down.
Either way, I will keep an eye on what you need and offer what I can. If you want any of the above they are yours...
Good luck!
UPDATE: went out and took a look at what I had to donate... here's a list
All off my 05
stock front tires (look pretty new)
stock axle with sprocket hub
stock tie rods
stock bumper
stock brake lines
stock clutch perch/lever
stock hood
stock chain
stock exhaust & header
I'm out in Cali so you might want to see if you can get some of the items closer to you to save on shipping. If you want any of these just let me know and they will be packaged up for greyhound.
desrt_racr15
Apr 14 2007, 02:07 PM
i got some red plastic of my 04 racebike, its in pretty bad shape, no breaks or cracks, stress marks and alot of scratches tho, front fenders are shaved too.
Eric.
millertime
Apr 15 2007, 09:11 AM
i have 05 black plastic.. cut front fenders... epoxyed white a arms and tierods.. trails tech 1 1/8 X bars no clamp for the big bars.. but do have the stock handle bar clamps...
i guess maybe we should post some pics so you can decide which stuff you like the best you have to pick from.. i will get all my stuff together today and snap a couple pics..
ONEFASTR
Apr 15 2007, 01:30 PM
QUOTE(millertime @ Apr 15 2007, 10:11 AM) [snapback]360315[/snapback]
i have 05 black plastic.. cut front fenders... epoxyed white a arms and tierods.. trails tech 1 1/8 X bars no clamp for the big bars.. but do have the stock handle bar clamps...
i guess maybe we should post some pics so you can decide which stuff you like the best you have to pick from.. i will get all my stuff together today and snap a couple pics..
i have the stock wheels and tires off my 07. 1 ride on them. 07 headpipe and muff with hrc tip. 0 rides. bars,clamp and dash.
Zach648
Apr 17 2007, 06:30 PM
What year do you want to base your build on? I see alot of o5 parts just wondering what your looking at and what your thinking? I know alot of the parts are interchangeable but motor, suspension, ect...
sredish
Apr 17 2007, 07:38 PM
not the greatest thing but I think I have some stock a-arms I can donate. maybe a few other things but not sure.
-pinned this topic as well
Zach648
Apr 20 2007, 11:05 AM
If nobody donates a frame are you going to try and buy one?
sredish
Apr 20 2007, 12:18 PM
QUOTE(Zach648 @ Apr 20 2007, 11:05 AM) [snapback]362200[/snapback]
If nobody donates a frame are you going to try and buy one?
you have one to sell?
Zach648
Apr 20 2007, 12:42 PM
QUOTE(sredish @ Apr 20 2007, 10:18 AM) [snapback]362227[/snapback]
QUOTE(Zach648 @ Apr 20 2007, 11:05 AM) [snapback]362200[/snapback]
If nobody donates a frame are you going to try and buy one?
you have one to sell?
No, but I might, At my dealership theres a big bullitin about a big parts auction/ police auction saying that they are going to part out full bikes among numerious other things. I could go and see if I can get it cheap. Its not for a few weeks, but I can look into it.
Bigblock10
Apr 20 2007, 02:13 PM
Hey guys i dont realy have any parts to give all my stuff is 06-07. But i can paint the frenders any color you would like, also i can do some powdercoating for the smaller parts, "no frames, my oven is not that big.... YET"
just let me know if i can help
DEREK
millertime
Apr 21 2007, 08:56 AM
i will try to get some pics of the stuff i have ... had to have sugery on my wrist and get the nerves hooked back up, so i haven't been doing much... but anyway i will get some pics to see if you want the stuff i have
dwp138
Apr 21 2007, 12:04 PM
Shmit... Shoot me a PM if you want any of the stuff i offered.
Zach648
Apr 25 2007, 02:55 PM
Lets see some parts! I want to see this bike get built. Come on people lets see some donations!
BATCH450r
Apr 26 2007, 10:07 PM
maybe we can make a frame and fit a KTM525 engine in it

or a CR500 engine

i have a bumper and front brake lines i can donate and a slightly bent but restraightened stem with pro taper SE high bars.
BATCH450r
May 15 2007, 09:22 PM
so hows this project going?
Zach648
May 16 2007, 07:07 PM
Ya I dont know I sent him like 30, 25% shipping coupons two weeks ago and havnt hear anything from him.
fast 450r
Jun 25 2007, 07:37 PM
I hope it gets done the sooner the better
sorry but i dont have any parts to donate
BULLDOG
Jul 6 2007, 07:17 PM
Wow. Where'd he go?

I wonder if any of you sent him parts

Funny how he showed back up then
Zach648
Jul 6 2007, 07:45 PM
I dont know, he sent me a message not to long ago saying he he recived the coupons for shipping and he said thanks and that was that.
dwp138
Jul 6 2007, 08:11 PM
QUOTE(Zach648 @ Jul 6 2007, 07:45 PM)

I dont know, he sent me a message not to long ago saying he he recived the coupons for shipping and he said thanks and that was that.
I have had quite a few parts sitting around for him , but have not gotten any word.
BULLDOG
Aug 8 2007, 10:44 AM
Hey Schmitthead, what is up? Did you build your quad? Let see some pics. Do you still need parts?
prlandry
Sep 11 2007, 11:07 PM
Hey Schmitthead, you still building that R? Or are you just going to buy an other one?
BATCH450r
Sep 11 2007, 11:47 PM
i can also give u a stock tank. though it has a few 2 inch diameter holes in it

i think you would have problems holding gas in it though


hows it going?
er33ction
Nov 22 2007, 12:11 AM
anyone willing to donate parts to me lol?
Calta450R
Mar 27 2008, 09:12 AM
What ever happened with this? I think we should all give it another shot and really get one built this time... we could raffle/auction it off after its built and raise some money for the org. Everyone wins... we all get the spare stock parts out of our garages, someone gets a good deal on a bike, and the org gets the profit. What do you guys all say?
Bigblock10
Mar 27 2008, 09:32 AM
Or we could auction it off and give the money to a Charitable organization, or just a organization that's it into keeping riding area's open for us, wether its to help keep Area's clean or what ever.. you know give back to the sport we all love
DEREK
prlandry
Mar 27 2008, 11:27 AM
Hmm!.... I remember how excited this guy was to get all these parts donated so he could start the build. That didn't last too long.
BoochTroop17
Mar 27 2008, 11:44 AM
crap! i should of never bought a new bike.. we could of just made me one.. lol i hope he gets all the parts tho i would like to hear how it goes n maybe some pics of the project
h0nda450mainiac
May 21 2008, 09:59 PM
lol i got a gas cap lol he can have for the bike lol : )
Zach648
May 22 2008, 04:54 PM
Ive got a motor, frame, axle, swinger, shocks, a-arms, tires and wheels, some plastics, lock nut, stem, bars, bumper, hubs, brake lines, seat cover, grab bar, sprockets, skid plates, just missing some wires, gast tank, carb nuts and bolts and misc little things. They way it sits it could be made into a drag bike, considering the motor I have has a mild build already.(Kenz Head, 13.1 piston, and HC2) Then who needs plastics right? Plus I have the bill of sale for the frame and its in my name, sounds like this could be alot easier.
I think you guys should donate it to the brokeback foundation, so I can sell it and pay some hospital bills!
What you guys say? And if you live in a city that has a Greyhound Bus Station all the misc parts can be shipped to me @ no charge to you.
xc1993
Dec 12 2008, 08:58 PM
hey why dont we try to get this going SO IT WILL REALLY HAPPEN and we can donate it to cancer research or fo like our troops or something just a thought
Zach648
Dec 12 2008, 09:08 PM
Count me out on it, Ive done built a bike out of all my left over parts. I tried to get a little help, but I ended up just buying a swingarm and a few odds and ends and its pretty much done for a dune/drage bike. I'd like to get it PC'd but just ran out of time.
Heres the latest pic with out the haulers and mohaks
bubba82
Dec 15 2008, 05:11 PM
lets do it for the troops. auction it later for TBI research for the injured soldiers. i will throw down on any parts i have left over. please let me know as iam a injured soldier and know how much help they could really use
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.