Start by removing old hood assembly along with head light... remove 2 lower rubber seals on frame that held the lower part of the light... mount new trail tech plate here.. I locktited these 2 bolts.... for safety.
Now i installed the lights and used the old stock lighting plug and wired it to the lights for removable purposes, it still went simple.
Once all the lights are installed and placed... i put the hood on over the new lights and mounted it to the rear part to the tank, this hood is larger then others reaching all the way back to the gas tank and bolt up there... then postion your lights at the angle needed... drill the holes threw the stock plstic in the holes already on the trailtech hood, then proceed in inserting plastic rivets wich are included, then have an allen key and 8mm wrench to tighten the angle of the head lights.
I love the way it looks... couldnt be happier... Brightness? i havnt tested that out at night yet.. I will Edit this post and add it when i get the chance.
Now For the Pics... With a shot of how i relocated my light (drilled 4 holes in trailtech plate and used zip ties)
Here they Are
Ry
Before:
Intalation/ Relocate Ignition:
After:
