05 subframe on 07 - Honda TRX450R Forums: Honda TRX 450R Forum

Ex_Rider43 · 08-13-2008, 05:02 PM

Can you do this ?

my o7 is a kicker , and the 05's are easier to find , + .. everybody here has E-start 06+.

quadforce*com · 08-13-2008, 05:49 PM

I was looking to do the same thing but the pipe mouts are different. you will have to work with that if you do I also read that you have to do something different to put the 06+ plastic on them.. I do not think it is anything major but I remember reading that it is not 100% bolt and go.

hondaman01 · 08-13-2008, 06:25 PM

Quote:

I was looking to do the same thing but the pipe mouts are different. you will have to work with that if you do I also read that you have to do something different to put the 06+ plastic on them.. I do not think it is anything major but I remember reading that it is not 100% bolt and go.[/b]

i have 07 plastic on mine and the rears are a direct bolt on the front/hood area is whats different

i think it would work except you would also need a 04-05 grab bar due to the exhaust mount

quadforce*com · 08-13-2008, 08:05 PM

Quote:

I was looking to do the same thing but the pipe mouts are different. you will have to work with that if you do I also read that you have to do something different to put the 06+ plastic on them.. I do not think it is anything major but I remember reading that it is not 100% bolt and go.[/b]

i have 07 plastic on mine and the rears are a direct bolt on the front/hood area is whats different

i think it would work except you would also need a 04-05 grab bar due to the exhaust mount
[/b]

ok cool I must have misunderstood. sounds like you may have a plan then.

Nor*Cal · 08-13-2008, 09:15 PM

Not sure if you can make it work but I have a used 05 sub-frame I would sell you for $50 + shipping if you want to give it a try. It comes with the seat latch and all of the rubber pieces as well. Everything you need.... if interested I'll take some pictures for you.

And the rear fender would be fine. You'll need to shim it up about 1/2 off the 05 sub-frame so you do not end up with a gap between the seat and the rear fender.

Ex_Rider43 · 08-14-2008, 05:02 PM

Thanks for the info guys ,

Nor*cal : is it straight ? try to get a quote for shipiping in Canada .. i might be expensive i dont know .. my zip code is G0M 1R0

08-13-2008, 05:49 PM	#2 (permalink)
quadforce*com 450R Racer Join Date: Sep 2006 Location: Waxahachie, TX Posts: 2,810	I was looking to do the same thing but the pipe mouts are different. you will have to work with that if you do I also read that you have to do something different to put the 06+ plastic on them.. I do not think it is anything major but I remember reading that it is not 100% bolt and go. __________________ My ATV Set up page more info on build 2006 TRX450ER

08-13-2008, 05:02 PM	#1 (permalink)
Ex_Rider43 250EX Rider Join Date: Feb 2005 Posts: 123	Can you do this ? my o7 is a kicker , and the 05's are easier to find , + .. everybody here has E-start 06+.

Remove Advertisements Sponsored Links
TRX450R.org Advertisement

08-13-2008, 09:15 PM	#5 (permalink)
Nor*Cal 450R Rider Join Date: Jan 2007 Location: Bay Area Posts: 1,938	Not sure if you can make it work but I have a used 05 sub-frame I would sell you for $50 + shipping if you want to give it a try. It comes with the seat latch and all of the rubber pieces as well. Everything you need.... if interested I'll take some pictures for you. And the rear fender would be fine. You'll need to shim it up about 1/2 off the 05 sub-frame so you do not end up with a gap between the seat and the rear fender.

08-14-2008, 05:02 PM	#6 (permalink)
Ex_Rider43 250EX Rider Join Date: Feb 2005 Posts: 123	Thanks for the info guys , Nor*cal : is it straight ? try to get a quote for shipiping in Canada .. i might be expensive i dont know .. my zip code is G0M 1R0