ignition relocation

[ralph brunt]

so where do you guys put the ignition switch when you upgrade your bars?

[thehonda450r]

so where do you guys put the ignition switch when you upgrade your bars?[/b]

do a search...there are bunch of suggestions on here

[hoser]

do a search...there are bunch of suggestions on here
[/b]

Exactly.

This was just posted a couple days ago.

http://www.trx450r.org/forum/index.php?showtopic=83050

Look at post number 8 by Trixed450r. It looks pretty nice.

[mikeybez715]

so where do you guys put the ignition switch when you upgrade your bars?[/b]

You can do a search for this- example- Warning light relocation, key relocation- or dash board removal. etc.

Here is what I did- Mounted them on my hood- Clean Look, out of the way- Still visible- Took about 20 mins- and the best part it was FREE!!

I used a 5/8 drill bit for the lights, and drilled another hole for the key and reamed it out to make the key fit-

[mikeybez715]

Exactly.

This was just posted a couple days ago.

http://www.trx450r.org/forum/index.php?showtopic=83050

Look at post number 8 by Trixed450r. It looks pretty nice.
[/b]

Thanks for the props Hoser-

[ralph brunt]

You can do a search for this- example- Warning light relocation, key relocation- or dash board removal. etc.

Here is what I did- Mounted them on my hood- Clean Look, out of the way- Still visible- Took about 20 mins- and the best part it was FREE!!

I used a 5/8 drill bit for the lights, and drilled another hole for the key and reamed it out to make the key fit-
[/b]

thanks guys i will search it out
and yes it looks clean in the hood

[hoser]

Thanks for the props Hoser-[/b]

No problem, it's a nice looking setup!