|06-13-2006, 09:24 PM||#1 (permalink)|
will an 8 inch hauler fit on an 9 inch rim? steel or aluminum VERY IMPORTANT!!! please i'm in a rush for this, if you know please let me know alright?
|06-13-2006, 09:42 PM||#3 (permalink)|
Join Date: Sep 2005
8 in wide tire "will" fit on a 9" wide rim. why you would do this is beyond me.
tire made for a 8" tall rim will not fit on a 9" tall wheel. It might if you get a tire press large enough and the beads don't snap.
|06-13-2006, 09:57 PM||#5 (permalink)|
yeah my thinking was, if the tires smaller then the rim... theoretically, the tire will fit on the rim... then it beceomes... well can you stretch it an inch? thanks guys.
being messed over by a well known . org member sucks :(
thanks guys, looks like its back to teh ol check book for new rims....
(.org members name with held) no reason to "beat a ead horse as desert says ) sorry.
|06-13-2006, 11:19 PM||#6 (permalink)|
Join Date: Oct 2005
Location: Central Cali
width you can play with..
diameter you CANNOT....
**06 450ER**... #3 (Dale lives on)
86TRX250R (mostly stock 66mm bore x 72mm stroke) **for sale**
86TRX250R (ESR310 72.5mm bore x 72mm stroke '298cc' fully modded) **SOLD**
88TRX250R (ESR330 77.5mm bore x 74mm stroker '345cc' fully modded)
HRC kit (all but gone)
Hot Cams stage III
Okie porting w/ATP CV4 springs (36mm Ti/31mm)
Venom/KBR N2O Porting w/KW springs (37mm/31mm)
Venom/KBR 487 100mm 14.25:1 piston
Cold Fusion Nitrous**
Venom 'QP' pipe
ESR Pro Series pipe
ESR modded intake w/RAT stack
42mm Taper-Bored FCR
Direct Drive clutch lockout, CR500 springs
GT Thunder-Link w/Durablue Lowering Link
Durablue Anti-Sway Bar
Modded shock mounts
Rage Modded Tranny
Jetting/Carb: #168, #45slow, NGPR needle 3rd clip, #55 Leakjet, Pilot 2 turns out.
Jetting/N2O: 22N/21F (22hp)
*STU Comp Cut 21x12x8 (6) paddle 'Padla Brats' on Douglas Blue label 8x8.....
Thanx to: Venom/KBR (Mixxer/Kam), Rage ATV (Dee), Sredum (Chris), and many ORG members
|06-13-2006, 11:26 PM||#7 (permalink)|
Join Date: Nov 2004
Now wait a minute a 9" wheel dia will go on (maybe over) a 8" rim. The 64 dollar question is does he want it to hold air?????????
|06-14-2006, 01:00 AM||#8 (permalink)|
Join Date: Mar 2006
Location: Cave Creek, Arizona
Why am I picturing somebody trying to pound a square peg in a round hole???
Grady, are you insinuating that Sloverado told you that an 8" dia tire would fit on a 9" dia rim, or did you assume that it would?
07 HD FLHT - sorry, but let's face it, riding a hog gets you laid more than riding a trx ;-)
06 TRX511ER - SOLD
Venom Porting and Head Mods with +1 KW Valves all around
Venom 100mm 14.25:1 Piston
Venom Modded ESR Intake
Venom Modded 43mm FCR with Rat Stack
Hot Rods +3 Stroker
MaxPower Ice Cube Cylinder
Early HRC Cam
|06-14-2006, 01:03 AM||#9 (permalink)|
Join Date: Jun 2006
Location: Ayr, QLD, Australia
sorry, there is no chance of fitting a 8" hauler on a 9" rim.
the last number is the size of the rim (eg. 20x11x9).
20 is the height
11 is the width and
9 is the rim diameter
hope this cleared it up for ya
Hotcams Stage 2
Bills Exhaust - Full System
K&N + outerwear
Durablue Eliminator 2+2
Custom Chromoly Stem
Kenda Knarlys 20x11x9
5450 hours on the meter
Been to **** and back!!
|06-14-2006, 03:59 AM||#10 (permalink)|